| |
| Quick Cross/Fence |
Software for creating fence diagrams and cross sections
|
|
|
Page
Contents
The QuickCross/Fence preview
screen now offers a full set of drawing tools to make creating cross
sections and fence diagrams much easier and faster. These drawing tools
are much more customized for cross section drawing than the tools that you
would find in a general CAD system. First of all, the program
automatically places nodes at each contact point between the geologic
layers. You simply click on the nodes surrounding each layer and then
create the polygon. You can even create rounded lenses by selecting 3 or 4
nodes. Additional tools let you add fault lines, arrows, bitmap symbols,
and text. Click on the samples below to enlarge:
 
 
Back
to Page Contents
-
Drawing/Annotation
Tools to Modify Drawings Directly on Preview Screen!
-
Intelligent
Cross Section Tools to create Nodes, Lenses, & Symbols
-
Browse
to Place Borehole Geologic Layers into a Data Table
-
Create
Colored Cross Sections without using QuickGIS
-
Set Custom Page Size for
Cross Sections up to 24 in. by 36 in.
-
Place
up to 50 Borings and 2 Parameters on Cross Sections
-
Draw
Borings with Azimuth and Incline on Cross Section
-
Cross
Section Legend Increased to 30 Fill Patterns
-
Create
Custom Fill Patterns using any Paint Program
-
Save
Drawing Files to .BMP, .WMF, .EMF, .MDF (new format)
-
Utilize
New .MDF Format for Sharing Drawing Files with Colleagues
Back
to Page Contents
System Requirements
- 100 Mhz Pentium compatible PC
running Windows 9x/2000/NT/ME/XP
- 32 Mb RAM, 8 Mb free hard disk
space
- 500 Mhz and128 Mb Ram recommended
for faster printing
Back
to Page Contents
|
|
|
|
check out 
