|
Solinst 3500 - AquaVent |
|
Page Content
Page Content
Solinst AquaVent Overview
Solinst AquaVent Applications
Solinst AquaVent Features
Solinst AquaVent Benefits
Heading
Solinst AquaVent Overview
The Solinst AquaVent Vented Water Level Datalogger records accurate water level and temperature measurements in shallow groundwater and surface water applications. It combines pressure and temperature sensors, hydrophobic filters and datalogger within a 7/8" x 7" (22 mm x 178 mm) stainless steel housing.
The AquaVent uses a gauged pressure transducer; it is open to the atmosphere via a vented cable to surface. Atmospheric pressure is applied to the transducer diaphragm, providing a cancellation effect for barometric pressure. This results in actual water level recordings. The vented cable and Solinst AquaVent logger are protected from moisture by built-in desiccants and hydrophobic filters.
The vented pressure transducer is made of Hastelloy®, making it extremely durable and accurate in a wide range of temperature and monitoring conditions. The sensor provides an accuracy of 0.05% FS, and can withstand 2 times over-pressure without permanent damage.
The robust FRAM memory can hold up to 120,000 data sets when programmed in Solinst Levelogger® Software with a compressed linear sampling mode.
Back to Page Content
Solinst AquaVent Applications
- Ideal for shallow applications: up to 65 ft (20 m) submergence
- Aquifer characterization: pumping tests, slug tests, etc.
- Stream gauging, lake and reservoir management
- Watershed, drainage basin and recharge monitoring
- Stormwater and runoff monitoring
- Long-term water level monitoring in wells and surface water
Back to Page Content
Solinst AquaVent Features
- Gauged pressure sensor for highly-accurate water level measurements: 0.05% FS
- Multiple built-in hydrophobic filters and desiccants — no need to replace, reducesAquaVent maintenance
- Easy-to-access, user-replaceable batteries in Wellhead
- Options for MODBUS (RS-232/RS-485) and SDI-12
- Separate cables for each communication protocol
- Use with Solinst software for multiple logging options including linear, event, and scheduled sampling
Back to Page Content
Solinst AquaVent Benefits
- Automatic barometric compensation reduces time required for post data processing
- Integrate into a third-party data collection system for remote real-time data
- Continuous, reliable water level data for long-term monitoring projects
- Actual water level readings for instant aquifer test results
Back to Page Content
AquaVent
Specifications
AquaVent
Datalogger |
Level
Sensor: |
Piezoresistive
Silicon with Hastelloy Sensor |
Accuracy: |
±
0.05% FS Typical |
Stability
of Readings: |
Superior,
low noise |
Units
of Measure: |
m,
cm, ft., psi, kPa, bar, ºC, ºF |
Normalization: |
Automatic
Temperature Compensation |
Temp.
Comp. Range: |
0º
to 50ºC |
Temperature
Sensor: |
Platinum
Resistance Temperature Detector (RTD) |
Operating
Temperature: |
-20ºC
to 80ºC |
Temp.
Sensor Accuracy: |
±
0.05ºC |
Temp.
Sensor Resolution: |
0.003°C |
Battery
Life: |
8
Years — based on 1 reading/minute |
Clock
Accuracy: |
±
1 minute/year (-20ºC to 80ºC) |
Thermal
Response time: |
3-5
minutes |
Maximum
# Readings: |
40,000
sets of readings in non-volatile FRAM memory (up to 120,000 in
compressed mode) |
Memory: |
Slate
and Continuous |
Communication: |
9600
bps Solinst USB, 1200 baud SDI-12, Modbus RS-485/RS-232 (various speeds) |
Size: |
7/8"
x 7" (22 mm x 178 mm) |
Weight: |
4.6
oz. (129 grams) |
Wetted
Materials: |
Delrin®,
Viton®, 316L stainless steel, Hastelloy |
Sampling
Modes: |
Linear,
Event & User-Selectable with Repeat Mode, Future Start, Future Stop,
Real-Time View |
Measurement
Rates: |
1/8
sec to 99 hrs |
Barometric
Compensation: |
Automatic |
Models |
Full
Scale |
Accuracy |
M5 |
5
m (16.4 ft.) |
±
0.3 cm (0.010 ft.) |
M10 |
10
m (32.8 ft.) |
±
0.5 cm (0.016 ft.) |
M20 |
20
m (65.6 ft.) |
±
1 cm (0.032 ft.) |
Aquavent
SP/SOX Wellhead |
Materials: |
Polypropylene,
Delrin, 316 stainless steel, Viton, Polyamide |
Dimensions: |
Automatic4.0"
x 5.5" (102 mm x 140 mm) |
Operating
Temperature: |
-20ºC
to 80ºC |
IP
Rating: |
IP
64 (dust and splash proof) |
Batteries: |
Four
(4) 1.5V AA lithium batteries |
Wellhead
Comm. Cable Length: |
15
ft (4.5 m |
Aquavent
Vent Cable |
Wetted
Materials: |
Polyurethane,
316 stainless steel, Viton |
Diameter: |
Cable:
0.32" (8 mm),
Connectors"
0.86" (22 mm) |
Lengths: |
1
to 500 ft |
Operating
Temperature: |
-20ºC
to 80ºC |
Back to Page Content
|
|
|
|